1. High-grade materials, reliable and safety.
2. Portable and lightweight, easy to carry.
3. Fashion, beautiful, handy, healthy and simple.
4. Easy to forge a natural and fresh makeup.
5. Suitable for each beautiful lady.

1. Material: plastic
2. The hole at the end of the handle is designed to work with the telescopic pole
3. The handle has a clamp in the middle, which can play a fixed role
4. The two sides of the brush body are raised, humanized design, convenient for brushing the pool bottom and wall connections
5. The bristles are very fine and neatly fixed on the brush body, and the toughness and hardness of the bristles are also scientifically designed to brush down the stubborn stains attached to the bottom and walls of the pool
6. One-piece molding, strong and durable
7. Length: 45cm
8. Weight: 246g

1. 5.5V/1.5W polysilicon solar panel, fast charging speed, and high conversion efficiency.
2. 18pcs 2835 LED SMD beads, up to 600LM brightness.
3. 6-8 hours of charging time under direct sunlight, can works for 8-10 hours.
4. Support intelligent motion sensing control, 150 degree sensing angle, 8-10 meters sensing distance.
5. 1 x 18650 lithium batteries, a total of 2200 mAh.
6. ABS+PC material, high hardness, shockproof and anti-corrosion.
7. IP65 waterproof.

คุณสมบัติ :
1. การใช้งาน - สำหรับเสาอากาศ FPV, แว่นตา FPV สำหรับโดรนสี่ใบพัด, เสาอากาศไวไฟ และอุปกรณ์อื่นๆ ที่มีขั้วต่อ SMA และ SMA พลาริตี้รีเวอร์ส เหมาะสำหรับการสร้างโดรนแบบกำหนดเอง
2. หมุดตรงกลาง สายไฟด้านนอก
3. สีทอง
4. จำนวน: 18 ชิ้น / 1 ชุด
5. ขนาด: 10x7x4 ซม.
กรุณาเผื่อความคลาดเคลื่อน 0-3 มม. เนื่องจากการวัดด้วยมือ
เนื่องจากความแตกต่างของจอมอนิเตอร์แต่ละเครื่อง ภาพอาจไม่แสดงสีจริงของสินค้า ขอบคุณครับ/ค่ะ!

SMA ตัวผู้เป็นตัวเมีย + SMA ตัวผู้เป็น RP SMA ตัวเมีย + SMA ตัวเมียเป็น RP SMA ตัวผู้ + RP SMA ตัวผู้เป็นตัวเมีย + SMA ตัวเมียเป็นตัวเมียแบบบัลค์เฮด + SMA ตัวเมียเป็นตัวเมีย + RP SMA ตัวเมียเป็นตัวเมีย + SMA ตัวเมีย rp SMA ตัวเมีย + SMA ตัวผู้เป็นตัวผู้ + SMA ตัวผู้เป็น RP SMA ตัวผู้ + RP SMA ตัวผู้เป็นตัวผู้
90 องศา SMA ตัวผู้เป็นตัวเมีย RA + SMA ตัวผู้เป็น RP SMA ตัวเมีย RA + SMA ตัวเมียเป็น RP SMA ตัวผู้ RA + RP SMA ตัวผู้เป็นตัวเมีย RA
TYPE T-SMA ตัวผู้เป็น 2 ตัวเมีย + SMA ตัวเมียเป็น 2 ตัวเมีย + RP SMA ตัวผู้เป็น 2 RP SMA ตัวเมีย

Features:
1. 18-hole large-capacity design to meet more storage needs
2. Neatly stored, making it easier to take out seasonings
3. 100ml large-capacity seasoning bottle, convenient and quick to fill with seasonings
4. Precise discharge hole design ensures even and smooth material spreading
5. Threaded cap design, good sealing effect
6. The stand supports 360-degree rotation, making it easy and quick to pick up items.
7. Stable the bracket and place it without shaking.
8. The bracket is made of high-quality material, not easy to adhere to grease, durable and easy to clean.

Product parameters:
1. Material: ABS+PP+PET plastic bottle
2. Seasoning jar capacity: 100ml
3. Product size: spice rack 26 x 23 x 34cm, spice bottle: 5 x 5 x 9.5cm
4. Product net weight/gross weight: 1.3kg/1.6kg
5. Packaging: color box
6. Note: Only the stand + seasoning bottle will be shipped, nothing else!

1. Brand new and high quality.
2. Small and lightweight, easy to carry.
3. 5 Pin L Style MagSafe 1 interfaces.
4. The 85W MagSafe 1 power charger suitable for A1286 / A1211 / A1290 / A1297 / A1222 / A1343 / A1260 / S1175 / A1212.

1. Material: ABS + PC
2. Light source: white light + yellow light + red light
3. Switch: dual press switch (Square light switch + U-shaped light switch)
4. Battery: built-in 2 x 2400mAh 18650 batteries (4800mAh total)
5. Charging method: Type-C USB charging
6. Charging time: 8 hours
7. Battery life: 6.5-100 hours
8. Except for the red light mode, any mode allows for stepless dimming by long pressing. Pressing again after 5 seconds in any mode will turn off the light.
9. Waterproof rating: IPX4
10. Lumens/range: 300-1000LM
11. Features: can be hung or placed, can be used with a stand (not included)
12. Light source: white light + yellow light + red light
13. Double-sided light source S1/S2 stepless dimming, continuous pressing gradually adjusts from high brightness to low brightness, then release when the brightness is adjusted to the desired level.
14. Compact and space-saving design, perfectly sized for one hand, convenient to hold, portable and lightweight.
15. Net weight: 293g
16. Dimensions: 15 x 10 x 4.5cm

1. Working power supply: DC5V external power supply or 18650 battery (both need to be prepared by yourself)
2. Applicable batteries: batteries that meet the stop discharge voltage of 2.5~3.5V and 4.2V charging are applicable
3. Power supply interface: Type-C interface, power supply line is prepared by yourself (C port mobile phone line)
4. System language: Chinese, English
5. Test quantity: 1-way charging and discharging measurement (only right battery)
6. Internal resistance measurement: Support, use DC two-wire method to test internal resistance
7. Charging function: Support, 1-way program control about 1A (MAX) charging; 1-way hardware control about 0.5A (MAX) charging
8. Discharging function: Support, only 1-way supports about 1A (MAX) discharge and automatically stops when the condition is met
9. Automatic charging and discharging: Support, the battery is fully charged at the end of automatic mode (stop voltage is set to 2.8V or above)
10. Cyclic charging and discharging: Support, 1~9 cycles adjustable
11. Status prompt: Supported
12. Stop discharge voltage: 2.5V, 2.6V, 2.7V, 2.8V, 2.9V, 3.0V, 3.1V, 3.2V, 3.3V, 3.4V, 3.5V, 11 levels adjustable
13. Discharge current: two resistors, about 1A current (MAX), not adjustable, does not support self-modification
14. Charging voltage: controlled by dedicated battery charging chip, about 0.5A/1A charging (MAC), full charge voltage 4.2V
15. Power off save: only save the setting parameters, not the measurement data
16. Weight: 80g
17. Product size: 110×88x30mm

Test method:
Wait a few seconds after installing the battery, read the battery data, and the battery voltage and internal resistance parameters will be displayed. There will be a delay in data loading during the battery loading and unloading process. Check after the data stabilizes

About capacity test:
The discharge must be completed to measure the capacity. I have never met anyone who wants to measure the capacity just by installing the battery. Discharge takes time. You have to wait for the discharge to end automatically to have a complete capacity in the discharge stage

This product uses the DC two-wire method to test the battery internal resistance principle:
DC impedance is based on the physical formula R=V/I, the test set The battery is forced to pass a large constant DC current (currently 10A-80A is generally used) in a short period of time (usually 2-3 seconds), and the voltage at both ends of the battery is measured, and the current battery internal resistance is calculated according to the formula. The DC two-wire test internal resistance is the result of the middle line resistance, and the result is used for reference comparison between batteries tested in the same batch. Due to the influence of contact resistance and battery self-loss, the internal resistance may not be identified normally and cannot be measured. For those with high requirements for internal resistance measurement accuracy, the TS235 internal resistance tester (AC four-wire method) can be used for internal resistance testing.