1. This case needs to be used with the waterproof case (not included), not directly on the camera
2. For Insta360 X3 action camera (camera and waterproof case not included)
3. Tightly and seamlessly combined with the camera housing, providing strong protection for diving and the camera.
4. Made of environmentally friendly silicone material, scratch-resistant, soft and durable.
5. Easy to install and remove.
6. Dimensions: about 70 x 69mm

Package includes:
1x Silicone protective case

1. Specially designed for the Mavic 3 Pro series, it can accommodate the flying kit and master kit, such as: aircraft + RC PRO remote control + RC remote control + 4 pieces of flight batteries + charger + filter + charging butler + propellers + data line etc.
2. ABS material, hard shell design, wear-resistant and drop-resistant
3. Highly tight and waterproof, can withstand repeated watering tests
4. High-density sponge, good softness, easy to store accessories
5. Portable handle, strong bearing capacity, comfortable hand feel, relieve hand pressure
6. Size: 41.8 x 34.5 x 18.6cm

1. PD+QC3.0 fast charging port, supports simultaneous charging of UAV and remote control, bi-directional output design, charging fast enough, can get rid of low battery anxiety
2. Pure copper contacts, anti-scratch and anti-oxidation, better electrical conductivity, pure copper contact shrapnel, safe and worry-free
3. Universal interface, intelligent identification switching, compatible with a variety of mainstream flash charging protocols in the market, universal for Apple and Android phones, suitable for mainstream 12V 24V mainstream models in the market
4. Material: ABS+ aluminum alloy
5. Input voltage: DC 12V-24V
6. Output voltage: DC 5V
7. Compatible products: for DJI MAVIC 3/MINI 2
8. PD output: 5V 5A/9V 5A/12V 5A/15V 5A/20V 5A
9. USB output: 5V 3A/9V 2A/12V 1.5A
10. Working temperature: 0-55 degrees Celsius
11. Mavic 3 charging time: about 95 minutes when the car charger works at 24V 2.5A; about 95 minutes when it works at 12V 5A
12. Mini 2 charging time: about 90 minutes when the car charger is working at 24V 1.2A
13. Packing list: charger x1, data cable x1 (excluding drone and remote control)
14. Dimensions: about 7 x 4.2 x 2.8cm
15. Weight: about 43g

1. Firmly fixed, no fear of accidental power failure, no impact on control, immersive flight
2. Double bayonet design: not only supports the card 0.4mm data cable, but also can be used to connect the battery cable and the viewers view cable to the mobile phone, or the third-party data cable.
3. Made of aluminum alloy, it is hard and firm, not easy to rust and corrosion, scratch-resistant and wear-resistant.
4. After installing the anti-detachment parts, it can be installed on the headgear without repeated disassembly and removal, and can be stored directly, compact and without any cumbersome
5. Material: aluminum alloy
6. Product size: 3 x 1.5 x 0.3cm
7. Weight: 2.2 grams
8. Compatible models: For DJI Avata Goggles 2

1. Can store mini joysticks and adapters, memory cards and filters
2. Comes with a lanyard, which is more convenient to carry and hang
3. Applicable models: suitable for DJI Pocket 2 (Note: Pocket 2 is not included)
4. Product size: 145 x 45 x 36mm
5. Weight: 47 grams

1. Material: plastic
2. For DJI Mavic Mini / Mini 2 SE
3. Protect the lens and gimbal, easily store the drone and propellers
4. Simple operation, easy installation and disassembly
5. Easy to carry and easy to store
6. Integrated design to protect the aircraft, dustproof and anti-collision

Installation notes:
1. Buckle the lens protection cover on the gimbal lens
2. Shrink the paddle and align the beamer with the sensor
3. Wrap the beamer around once and buckle it in the corresponding hole
4. The installation is complete

1. Adjustable with a scale: the optical filter can freely adjust the brightness of the light through rotation, and choose the appropriate brightness for shooting as the lens rotates continuously
2. Nano double-sided multi-layer vacuum coating process is more resistant to dirt, water and oil
3. ND/PL filter:
-Picture: You can adjust the gears to prevent overexposure in strong light environments, resist scattered light, increase color saturation, make the picture more transparent and gorgeous, and achieve large effects such as foggy flowing water and night light trails.
-Video: Reduce the shutter speed to make the video screen have appropriate motion blur and look more comfortable.
4. Material: plastic + optical glass
5. Product size: 2 x 1.3 x 0.3cm
6. Net weight: 5.7 grams
7. Applicable models: suitable for DJI Mini 3 Pro (note: drones are not included)

1. For DJI FPV Goggles V1 V2
2. The metal quick-release shell for flight glasses receiver play module
3. Can adapt to receiver module 3.0 and 3.0 PLUS with switch
4. CNC fine processing, anodizing treatment, quick disassembly and assembly.
5. Material: aluminum
6. Dimensions: 58 x 36 x 25mm
7. Weight: 36 grams

Reminder: This product does not contain the red fat shark receiver case, it is for display purposes only

1. The 5.8G RX PORT 2.0 is designed to be fixed with the FPV goggles headband ring screw, and is completely non-destructively installed on the side of the DJI goggles, so that you can use Fat Shark or various third-party Fat Shark interface 5.8G receiver systems, Conveniently transfer video and audio signals to the high-quality screen of FPV flying glasses for viewing or recording
2. Dimensions: 48 x 28 x 12mm
3. Weight: 10g (excluding the adapter cable)
4. Power input: 2S-4S (DC5.5 x 2.1)
5. Internal voltage: 5V 3A (with pad for output)
6. Power output: 2S-4S (DC5.5 x 2.1)
7. Signal input: Standard Fat Shark receiver port
8. Including third-party receivers: Reaxacc Furious, etc.
9. Signal output: standard audio/video

appendix:
Adapter mounting block and screw x 1
Audio and video cable x 1
Power cable x 1

1. Suitable for Insta360 Flow, tripods, mobile phone clips, and accessories such as fill lights, data cables, and storage bags.
2. Soft suede inner support, while stably storing the device, it is scratch-resistant and scratch-resistant for gentle care.
3. Hard shell, shock absorption and pressure resistance, effective protection and more peace of mind.
4. Portable handle, small and simple, easy to travel.
5. High-quality fabric material, durable.
6. Dimensions: 207 x 167 x 74mm
7. Weight: 240g

1. Compatible with all Mavic series, Mavic 3 / Mavic 2 / Mavic Pro
2. Tailor-made, stable support, fits the bottom structure of Mavic series drones, it is stable and not easy to fall off when placed lightly.
3. The intuitive display angle can better display the shape of the aircraft, and it can be unfolded or folded for display.
4. Low center of gravity and stable support, no shaking or tipping.
5. Note: The product only includes the bracket, nothing else

Specification:
1. Model: ZJ566
2. Material: plastic
3. Net weight: 93g

1. Made of high quality material, durable.
2. This item is used with the camera or phone mount, like as helmet straps.
3. Made of high quality ABS material.
4. A good choice for your helmet.
5. Safely secure your camera or phone on a vertical wall surface like a car bumper, wall, back of helmet, or similar.
6. Perfect for skiing, snowboarding, surfing, any action sport.

1. Suitable for Insta360 Flow mobile phone gimbal design, easy to store all accessories;
2. Two-way zipper, smooth and not stuck;
3. Compression and drop resistance, strong and durable;
4. Nylon fabric webbing is used, which is convenient to adjust the length, light and wear-resistant;
5. The mesh bag on the top cover can store small accessories such as data cables and charging treasures at will.
6. Size: 21.5 x 15x 7cm
7. Weight: 380g

1. Small size, ultra portable, can be easily packed in the backpack, suitcase or Hanging on the backpack bag.
2. Can store OSMO Pocket 2, cables etc.
3. Material: Nylon + EVA
4. Net weight: 64g
5. Size: 17 x 7 x 7cm
6. Note: manual measurement size, there could be 1-2mm error.

1. Powerful performance, easy to start, providing convenient and sensitive flight control, quickly master the joy of body control
2. Immersive physical control: with the help of physical technology, you can control the flight direction by slightly turning your wrist
3. Feature-rich and easy to use: streamlined handle design, comfortable grip
4. Integrated throttle trigger, gear switching, one key emergency stop and many other functional buttons, a finger that can be reached, one-handed control
5. A few simple steps, you can easily achieve takeoff and landing, acceleration, steering, backward flight, panning and other actions
6. Multi-dimensional flexible control: increase the rocker, flight height and direction control more smoothly, more convenient take-off and landing
7. Throttle trigger with backward function, in complex scenes after braking the aircraft, no need to turn around, you can return to the original way backward
8. Parameter dial can quickly adjust ISO, shutter and other camera parameters, no longer need to lift the hand in the flight glasses to complete the parameter adjustment, one-handed control more comfortable
9. Endurance: about 5h
10. Packing list: DJI RC Motion 2 x 1, hand strap x 1
11. Compatible products: DJI Avata, Goggles 2, Goggles Integra, FPV Goggles V2
12. Weight: about 170g

1. Carbon fiber material, light weight, high hardness, high aerodynamic efficiency;
2. The blades have passed the dynamic balance test, with low power consumption and strong battery life;
3. Precise mold opening, easy alignment of screw holes, and easy installation.
4. Applicable models: suitable for DJI Mini 3 (not applicable for Mini 3 Pro)
5. Main material: carbon fiber
6. Net weight: 15.3g
7. Size: 7.6 x 1.7cm

Packing list:
Propellers (pair) x 2
Screw × 10
Screwdriver × 1

1. Made of high quality carbon fiber, high strength and 1/3 lighter than aluminum selfie stick of the same size.
2. The handle is wrapped by food-grade silicone with non-slip texture, making it comfortable for every use.
3. After bearing the weight, it can be restored to its original shape without deformation under long-term use.
4. 5 sections are retractable and can be freely locked between each section
5. 1/4 threaded interface at the bottom of the selfie stick, can be installed tripod base.
6. Suitable for Gopro, insta360, DJI, and other action cameras, smart phones.
7. Material: 24T carbon cloth, aluminum alloy, silicone
8. Weight capacity: 0.3kg
9. Size: 32cm-120cm
10. Weight: 146g

1. Base built-in strong magnets, simple assembly
2. Metal clips, with a limit column, installed firmly and not fall off
3. With silicone spacers, increase the friction between the host and the base, anti-slip shock absorption
4. Expand more scenes: can be connected to the car tube clip, selfie stick, hanging neck bracket, etc.
5. The main body is made of nylon and fiber, weighing only 22.8 grams

Parameters:
1. Material: nylon + fiber, aluminum, silicone
2. Applicable models: for DJI OSMO Action 3
3. Weight: 22.8g
4. Size: 40.2 x 21.3 x 33.8mm

Packing list:
Adaptor x 1
Screw x 1

1. Time is correspondingly longer when two pieces are charged at the same time
2. Charging current: 3A
3. Charging voltage: USB 5V
4. Charging interface: USB TYPE-C / USB-C
5. Suitable for Insta360 One X3
6. Charging time: about 90 minutes
7. Size: 3x4x6cm
8. Note: Battery on display is not included

1. Precision fit, panoramic camera precision fit, easy to install, all-round fit, protect the camera from damage
2. Real camera cutout, not covering the buttons, battery compartment, pickup holes, completely avoiding the side buttons, not covering any holes or buttons on the camera
3. Suitable for Insta360 One X3
4. Material: PC
5. Use: protect the camera
6. Size: 12x5x7cm
7. Weight: 65g
8. Note: The product contains only the border and nothing else

1. 5.5-inch 1080p high brightness display, still clearly visible in direct sunlight
2. OcuSync 2.0 high-definition map system, with 5.8GHz and 2.4GHz two communication bands, the system can automatically select and switch between the 2.4GHz and 5.8GHz dual bands according to the different environmental interference, effectively reducing the impact of environmental interference on flight control and image quality, the map distance up to 8 km
3. Built-in microphone, speaker, can play 4K/60fps H.264 and 4K/60fps H.265 video material, also supports output through HDMI-interface
4. After downloading the pictures and video footage taken by the aircraft to the local remote control, you can use the Go Share function in DJIGO 4 to wirelessly transfer the downloaded footage to mobile devices, so it is efficient and convenient to share the footage
5. High reliability design, stable operation in cold temperatures and hot environments
6. Turn on the power can be quickly connected to the aircraft, no need to wait for installation, immediately enter the shooting state
7. Integrated design combined with the detachable remote pole, more convenient to carry out
8. Support the installation of other APP, to achieve more image editing and sharing functions
9. Battery capacity: 5000mAh, support fast charging
10. Use time: up to 2.5h
11. Applicable models: For DJI Mavic 2 Pro, Zoom, Air 2, Air 2S, Mini 2
12. Note: this remote control is not all new

1. The real machine opens the mold, the accurate match
2. Easy to install and use
3. Use environmentally friendly materials with confidence
4. For DJI Mavic Air 2
5. Repair accessories for replacement of accidental damage
6. Long life and easy installation
7. Material: plastic
8. Weight: 5g

1. Center vertical adapter for GoPro, supports 360 degree rotation.
2. Plastic material, light weight and durable.
3. Suitable for Insta360 /GoPro/DJI Action 2 etc.
4. Smooth surface, sturdy and beautiful, wear-resistant and corrosion-resistant, not easy to rust.
5. Mechanical processing, fine trimming, no burr. Make it easy to install and disassemble.
6. Material: ABS material

1. Suitable for DJI Mavic 2 Pro/Zoom drones
2. Can be remotely dispatched, used for advertising, throwing bait, throwing gifts, delivering meals, delivering wedding rings, etc.
3. USB charging, quick release, one-touch control by remote control.
4. Lightweight and safe, neither adding to the burden of the drone nor damaging the drone, easy to install and remove.
5. Bottom mounting kickstand, does not affect the propeller and sensors!

Other parameters:
1. Main material: ABS
2. Built-in battery capacity of 150 mAh
3. Charging interface: Micro-USB
4. Charging time: 90 minutes
5. Life span: charging once can be opened about 300 times
6. Net weight: 85g
7. Load weight: 500g (MAX)
8. Product size: 10 x 5.5 x 8.5cm

Packing list:
Thrower x 1
Booster stand x 4
Rubber band x 2
Bandage x 2
Connection cable x 1
Thrower charging cable x 1
Packaging: boxed

1. Translucent design, simple and beautiful.
2. Precisely tested by dynamic balance to provide strong pulling force for the flying machine.
3. Provide multi-directional protection for the aircrafts visual perception system against collision with foreign objects and dust.
4. Protects the visual perception system from scratches during transportation and extends the life of the machine.
5. Material: PC material
6. Applicable models: Applicable to DJI Avata
7. Weight: about 2.1g
8. Diameter: 73.7 mm

Packing list:
Propeller × 2 pairs
M2×7 screws × 8pcs

1. Support QC3.0 PD fast charge
2. No need to put the battery on the drone, check the battery level anytime, anywhere
3. Compatible with a variety of device charging, overcharge protection, overcurrent protection, safe charging
4. Charging time (input PD40W or above): Standard 2453mAh battery charging time is about 45 minutes, long battery life 3850mAh battery charging time is about 65 minutes
5. Input: 5V/9V/12V-3A
6. Output: 8.5V 4.0A (MAX)
7. Dimensions: 6 x 2.6 x 4 cm
8. Weight: 37 grams (without wire)
9. Note: The product is only for the charger, not including the battery

1. Translucent design, easy to observe the protection status of the gimbal;
2. Fit the body design, stable and not loose;
3. Provide multi-directional protection for the lens to prevent foreign objects from collision and dust;
4. Fix the gimbal to protect the lens from being scratched at all times during transportation and prolong the service life of the machine.
5. Main material: PC
6. Color: transparent black
7. Net weight: 10.1g
8. Product size: 6.7 x 5 x 5.3cm

packing list:
Lens protection cap x 1

1. After the product is used, the blades of the fuselage can be fixed to prevent tampering in the bag
2. Small, portable and lightweight
3. Material: plastic
4. Net weight: 5 grams
5. Product size: 4 x 2 x 1.5cm