1. Support USB-A and Type-C ports, dual-port charging, saving time and worry
2. Built-in intelligent security chip, all-round protection of equipment and avoid potential security risks
3. Gallium nitride support, smaller size and lower temperature
4. Applicable models: suitable for DJI Mini 2/Mini 3 Pro
5. Material: ABS
6. Input: 100-240V 50/60Hz, 0.8A
7. Type-C output: 5V 3A, 9V 3A, 15V 2A, 20V 1.5A, 30W Max
8. USB-A output: 5V 3A, 9V 2A, 12V 1.5A, 18W Max
9. USB-C&USB-A output: 5V 4A 20W
10. Dimensions: 6.2 x 5.9 x 2.6 cm
11. Weight: 76.8 grams

1. Compatible remotes: for DJI Mavic Air 2, Mini 2 and remote with screen
2. Easy to disassemble and assemble, feel comfortable
3. Ergonomic design, sensitive control
4. The height can be freely stretched from 2.6-3.2 cm
5. CNC machining, fine craftsmanship, top grinding treatment feels good
6. Main material: aluminum alloy
7. Net weight: 4.8G
8. Shipping List: joystick x 2, box x 1

1. Using high elastic material, the texture is soft and does not hurt the blade
2. Magic fit, quick and easy to use;
3. The paddle can be fixed to prevent accidental injury and accidental touch during storage and transportation.
4. Weight: about 10g
5. Material: nylon
6. Note: Cable ties only, not including the demonstration drone

1. The module cable can connect the Ronin-S external GPS module to RS 2 / RS 3 Pro
2. Improve the stability of the gimbal during rapid acceleration, reduce the impact of acceleration on the sensor, and avoid image distortion
3. Compatible products: For DJI RS 3 Pro, DJI RS 2
4. Reminder: The Ronin-S external GPS module is not included in the module connection cable and needs to be purchased separately!

Packing list:
Module cable x 1

1. The attitude of the aircraft will follow your hand movements and move with it, bringing the immersive sense of "man-machine" control
2. Operating frequency: 2.400-2.4835 GHz; 5.725-5.850 GHz
3. ambient temperature: -10 to 40 degrees Celsius
4. Battery life: about 5 hours
5. Charging voltage: 5 volts 1 amp, 5 volts 2 amp
6. Compatible products: for DJI Avata / DJI FPV / DJI Goggles 2 / DJI FPV Goggles V2
7. Emission power (EIRP).
-2.4 GHz: less than or equal to 28.5 dBm (FCC), less than or equal to 20 dBm (CE/SRRC/MIC)
-5.8 GHz: less than or equal to 31.5 dBm (FCC), less than or equal to 19 dBm (SRRC), less than or equal to 14 dBm (CE)
8. Effective signal distance (no interference, no obstruction): 10 km (FCC), 6 km (CE/SRRC/MIC)
9. Weight: approx. 167 grams

Packing list:
-DJI through the joystick × 1
-Hand strap × 1

1. Material: ABS/acrylic
2. Waterproof: 45 meters
3. 180 degree wide viewing angle, 93 percent transparency
4. Double handle design, easy to take and use
5. The outer shell is 50mm away from the lens, which makes shooting in half water and half air clearer
6. Water surface lens hood for sports camera, shooting half-water and half-air photos, simple and compact design makes shooting easy and free
7. The semi-circular spherical surface, push the water surface, so that the lens has enough field of view, so that you can shoot water and underwater objects, give you a great shooting experience, and take great pictures
8. Water will enlarge the objects in the water like a convex lens, direct shooting will cause the objects in the water to become distorted and larger, compared with the objects on the water, the photos taken in this way are very uncoordinated, and this product can be well coordinated, good for underwater and surface objects, so that the photos taken are normal and give you a real world
9. Size: about 24.5x18x10.5 cm
10. Weight: 720 grams

Packing list:
1. Lens hood x 1
2. Manual x 1
3. Cloth bag x 1
4. Color box packaging x 1

1. Aluminum alloy material, CNC processing, surface anodized anti-oxidation treatment, corrosion resistance, wear resistance
2. Great high precision laser engraving, quick and easy installation.
3. Convenient, quick and safe to install your action camera on the adapter plate.
4. Light weight and small size, it is convenient to carry and use.
5. Size: 15x6 cm
6. Weight: 138 grams
7. Suitable for Sony RXO/RXO II cameras

1. For DJI Mavic 3 Classic
2. Precision optics designed to increase the FOV of a wide-angle camera to 108 degrees
3. 15.5 mm equivalent focal length for a wider angle of view
4. Weight (individual): 12.6 grams

Packing list：
Widening lens × 1

1. Material: ABS+silicone
2. Dimensions: 25 x 1.6 cm
3. Applicable models: For Mavic AIR2, mavic2Pro, mavic Pro, FIMI X8, EVO2
4. Features: non-slip, wear-resistant, adjustable, lightweight design, easy to disassemble
5. Net weight: 23 g
6. Total weight: 28 g
7. The product does not contain drone items

1. Material: Silicone
2. Dimensions: 8.4 x 2.3 x 1.5
3. Applicable model: MAVIC MINI
4. Total weight: 15.6 g
5. Net weight: 10.2 g
6. Product list: Silicone beam slurry device x 2
7. Only with Silicone propeller Fixer, not including drone

1. Weight: 165 grams
2. Size: 19 cm, can be extended to 73 cm
3. Material: metal + rubber
4. Interface: 1/4 screw interface
5. Applicable: WG2, G5, SPG series, and other 1/4 inch hole stabilizer products (G4 series cannot be used)
6. Features: beautiful and practical, widely applicable, easy to install, length controllable, antifreeze rubber handle, comfortable grip, light and portable, durable

1. Main material: ABS
2. Attribute: Gray
3. Net weight: 9.4g
4. Gross weight: 23.1g
5. Product size: 7.1x8.7x3.2cm
6. Packing size: 9.2x7.6x3.5cm
7. Packing list: Heightened tripod x 1
8. Packing method: Boxed
9. Easy to disassemble and install
10. Durable and lightweight, will not increase the excessive burden on the drone
11. During take-off and landing, effectively prevent ground debris from damaging the airframe or the gimbal
12. Effectively increase the height of 2.2cm to reduce the impact force of the Mavic Mini body and battery and the ground
13. Note: The delivery only sends the stand, not including the drone

1. Support 2 frequency bands
2. Ergonomically designed remote control with Hall rocker for better control feel
3. Operating frequency: 2.400-2.4835 GHz / 5.725-5.850 GHz
4. Battery life: approx. 6 hours
5. Charging time: 2.5 hours
6. Operating ambient temperature: -10 to 40 degrees Celsius

1. 15km 03+ map transmission, more stable signal
2. Weighing only 390 grams, and using advanced technology to hide the antenna inside the body, the size is more compact and can be carried easily.
3. 5.5-inch full HD screen, can be continuously displayed at 700 nits high brightness
4. 4 hours of ultra-long battery life, more enjoyable aerial photography
5. Double spring rocker, more comfortable control
6. Built-in common interface, MicroSD / USB-C, convenient for users
7. Charging time: about 15 hours
8. Compatible products: for DJI Mavic 3 Classic, DJI Mavic 3, DJI Mavic 3 Cine, DJI Mini 3 Pro, DJI Air 2S

1. Specially designed paddle for Tello. Excellent pulling performance, lighter and more durable.
2. Excellent material and flight performance
3. Can be easily disassembled and assembled, easy to use
4. Well polished, no sharp edges, safe to use. 4.
5. Diameter x pitch: 3.0 × 4.4 inches (8.38 × 11.18 cm)

Packing list: quick release propeller (pair) × 2

1. The attitude of the aircraft will follow your hand movements and move with it, bringing an immersive sense of "human-machine integration".
2. Operating frequency: 2.400-2.4835 GHz; 5.725-5.850 GHz
3. Ambient temperature: -10 to 40 degrees Celsius
4. Battery life: approximately 5 hours
5. Charging voltage: 5 volts 1 amp, 5 volts 2 amp
6. Compatible products: for DJI Avata / DJI FPV / DJI Goggles 2 / DJI FPV Goggles V2
7. Emission power (EIRP):
-2.4 GHz: less than or equal to 28.5 dBm (FCC), less than or equal to 20 dBm (CE/SRRC/MIC)
-5.8 GHz: less than or equal to 31.5 dBm (FCC), less than or equal to 19 dBm (SRRC), less than or equal to 14 dBm (CE)
8. Weight: approx. 167 grams

Package List:
Controller × 1
Hand strap × 1

1. For DJI RS 3 Mini/DJI RS 3 Pro/DJI RS 3/DJI RS 2/DJI RSC 2
2. Clamp and fix the mobile phone, three-stage design
3. Comes with NATO interface, cold shoe and 1/4-20 threaded interface
4. When you need to install the mobile phone on the side of the stabilizer to monitor the image screen, you can use the mobile phone clip to fix the mobile phone
5. It can be rotated horizontally and vertically to meet the different needs of mobile phone horizontal and vertical screen monitoring

Packing list:
- Phone clip x 1

1. Using magnetic quick release design, increase the positioning column, strong impact resistance, can be firmly connected with the camera
2. The bottom of the adapter structure to adapt to most traditional sports camera accessories, the use of more diverse
3. Compatible products: DJI Osmo Action 3
4. Packing list: Osmo Action 3 quick release adapter x 1
5. Dimensions: about 4.02 x 2.1 x 3.42cm
6. Weight: about 16g